Инструкция по установке программы Techstream, установка драйвера MVCI, mini VCI на Windows 7, 8, 10 (32 и 64 бита). Скачать программу и драйвера Mini-VCI J2534 Toyota Techstream

※ Download: Mini vci j2534 драйвер скачать

Ввел 4 датчика от зимних шин и один от летней запаски. Проверил, все заработает: лампочка о непристегнутом ремне мигает, зуммер - не работает. Интересно, тут спуминается две группы датчиков. Инструкцию можно найти в интернете, но я приведу её здесь.

Внести необходимые изменения в реестр можно скачав и запустив данный файл. This package do not contain Toyota 22pin connector, so it can only do Toyota 16pin cars.

Mini VCI J2534 - Windows и может использоваться другими программами, такими как Techstream.

As it turned out, with little manual tweaking it is possible, contrary to the popular belief, to get it working under Windows 64-bit. Mine is actually Windows 8 x64, but for Windows 7 the configuration procedure дрпйвер be identical. So, Mii Firmware Update Tool should not be used for anything, but checking that the device is connected and working properly. Do not launch it yet. Then wait again by the way, you'll be vci that a lot with this cable. Everything works as you described. Thanks again, you the man! I may have a сеачать different mini, most things look the same as above but not everything. I am скачать some trouble with step 4d, I don't see any failing devices. I try to install the iMni driver, but it says the correct driver is already installed. It try it again, same thing, Ok, maybe it is, so I move on. The firmware update tool works, and I can see the cable, so it must be good. In my version, under Pass Thru Support. I haven't tried to connect to the car yet Thanks Hello everyone, I read here about how to make it work on 64bit, драйвер sure if it helps now but when I ordered mine on ebay some time ago it was from a romanian seller and it has a custom installer: mine works on 64 bit without having to do anything, until now I tested it on win7 64 bit and 32bit and works great. Any chance you can share that installer? I got the cable installed and the firmware tool can see it. But when I connect connect it still doesn't work. This is on a Windows 8. Any chance you can share that installer? I got the cable installed and the firmware tool can see it. But when I connect connect it still doesn't work. This is on a Windows 8. Ok, I got it so that it connects now fine and J2534 can get real-time and sensor data. However, when I go to set options it acts like it is getting a list of them and then comes back with nothing. Any ideas how to fix this?.

How to install Mini VCI Toyota Techstream 13.00.022 on Win7 obdii365
Can works on Honda, Toyota, Lexus and Volvo. При подключении шнурка и установленном драйвере в device manager'e будет такая картинка: После запуска Techstream залезаем в меню: и выбираем устройство: После нажатия кнопки Connect to Vehicle через 6 секунд открывается окно с параметрами машины: После нажатия кнопки Next через 22 секунды открывается главное окно программы: Нажмите, чтобы раскрыть... The firmware update tool works, and I can see the cable, so it must be good. А на маленьком экранчике, а машина выехала из гаража растояние примерно метров 6 , Зеркало3 , 49 00 12 03 41 00 36 00 30 00 30 00 37 00 64 00. Открываем Редактор Реестра Windows, на Windows 8.